- Home
- / Material
Inconel
Inconel is a family of nickel-based superalloys that are known for their high strength, excellent resistance to corrosion, and outstanding performance at high temperatures. Inconel alloys are widely used in aerospace, chemical processing, and other high-temperature applications. Here is a brief description of Inconel pipe, tube, flange, fastener, fittings, and round bar.
Pipe Fittings Specification :
Sheets & Plates Specifications |
ASTM B168 / ASME SB168, BS EN 10088-2, en 10028-7, IS 6911 |
Sheets & Plates Dimension Standard |
MSRR, AMS, BS, JIS, AISI, ASTM, GB, DIN, EN, etc |
Inconel Sheets & Plates Size Range |
Cold rolled ASME SB168 Grade Inconel Sheet 0.5-6.4 mm |
Inconel Sheets & Plates Width |
1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc |
Inconel Sheets & Plates Length |
2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc |
Inconel Sheets & Plates Thickness |
0.3 mm to 120 mm |
International Standard of Inconel Sheets & Plates |
ASTM A480 |
Tolerances (width / thickness) of Inconel Sheets & Plates |
EN 10258/ DIN 59381) |
Finish of Inconel Sheets & Plates |
2B, 2D, BA NO (8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc. |
Hardness |
Half Hard, Soft, Hard, Quarter Hard, Spring Hard |
Form |
Sheet, Plate, Strip, Flats, Clad Plate, Coils, Foils, Plain Sheet, Flat Shim, Flat Sheet, Shim Sheet, Rolling Sheet, Rolling Plate, Rolls, Blank (Circle), soft annealed, descaled, tread plate, sheared, annealed, Checker Plate |
Value Added Service |
Cladding, Heat Treatment, Annealed, Pickling, Polish, Rolling, Cutting, Bending, Forging, Minor Fabrication Etc. |
Inconel Profiling |
Plasma Plate Cutting |
Chemical Compositions :
Inconel |
Element, proportion by mass (%) |
||||||||||||||
Ni |
Cr |
Fe |
Mo |
Nb & Ta |
Co |
Mn |
Cu |
Al |
Ti |
Si |
C |
S |
P |
B |
|
600[11] |
≥72.0[a] |
14.0–17.0 |
6.0–10.0 |
— |
≤1.0 |
≤0.5 |
≤0.5 |
≤0.15 |
≤0.015 |
||||||
617[18] |
44.2–61.0 |
20.0–24.0 |
≤3.0 |
8.0–10.0 |
10.0–15.0 |
≤0.5 |
≤0.5 |
0.8–1.5 |
≤0.6 |
≤0.5 |
0.05–0.15 |
≤0.015 |
≤0.015 |
≤0.006 |
|
625[19] |
≥58.0 |
20.0–23.0 |
≤5.0 |
8.0–10.0 |
3.15–4.15 |
≤1.0 |
≤0.5 |
≤0.4 |
≤0.4 |
≤0.5 |
≤0.1 |
≤0.015 |
≤0.015 |
||
690[20] |
≥58 |
27–31 |
7–11 |
≤0.50 |
≤0.50 |
≤0.50 |
≤0.05 |
≤0.015 |
|||||||
Nuclear grade 690[20] |
≥58 |
28–31 |
7–11 |
≤0.10 |
≤0.50 |
≤0.50 |
≤0.50 |
≤0.04 |
≤0.015 |
||||||
718[2] |
50.0–55.0 |
17.0–21.0 |
Balance |
2.8–3.3 |
4.75–5.5 |
≤1.0 |
≤0.35 |
≤0.3 |
0.2–0.8 |
0.65–1.15 |
≤0.35 |
≤0.08 |
≤0.015 |
≤0.015 |
≤0.006 |
X-750[21] |
≥70.0 |
14.0–17.0 |
5.0–9.0 |
0.7–1.2 |
≤1.0 |
≤1.0 |
≤0.5 |
0.4–1.0 |
2.25–2.75 |
≤0.5 |
|||||